I need a special flexible molding but they won't sell to me me. You have to be a store or installer or they won't sell to you. I need a Flexitions Overlap reducer, oak grain molding, 1/2 inch groove by 2-1/8 inch wide and 7 feet long. I finished the floor but can't finish until I get this. Anyone have this that I can buy? Can anyone get it for me??? I have and S bend that it needs to follow SEE PIC.
This is the companies web page and products
http://flexitions.com/products.html
My PIC

Don't they have anyone to refer you to, in your area? If not...An online dealer? If they can't do that...sounds like you need to go over someones head. Maybe this new company is trying to use you as an advertising pawn? Hard for me to believe their protecting the trade. Geez..I shouldn't think like that.

If your in Tucson I can buy it or hire an installer to buy it for you and install it.

BTW did you leave enough gap there between the tile and wood?

Looks like his plan is to install the trim piece on top of the ceramic, I dont see any gap there.
I can order the piece for the OP if he is in Toronto area.

I'm in new jersey and no distributor here he said. I talked to the VP of the company but still gonna ask him again to ship. Ron

Maybe this will work...

http://cgi.ebay.com/Flexible-T-Molding- ... 79134c58cf

Now that I look at your picture again a t-moulding wont work. Maybe these folks have other profiles?

I could cut that gap wit me skilsaw.

I think you just like cuttin stone I think the woods 1/2" higher, so one of those overlap reducers will work. Wait a minute...something's weird about levels here. Darticus, did you glue down 3/4" over concrete?

The overlapping reducer will work as there is 1/2 inch between their heights. No gap needed and the wood is on wood. The company says now they will supply me. Thanks Ron