Hello,
This is my first hardwood flooring install, and I forgot to measure the transitions and as you can see in the photos they stick out at the edges
do you have any tips to catch up without cutting everything
Thank you in advance
https://photos.app.goo.gl/SPhpYPFp4F8j2k9H6
https://photos.app.goo.gl/pEpLH6eXRwt89xa76
https://photos.app.goo.gl/Fk5ip7TZfkDNeEZQ8
https://photos.app.goo.gl/14dW43vd9xPVs1NR7

The square ends cn be trimmed with a chisel or sharp utility knife. Is this what you mean? The bare wood will then need to be sealed and finished. Unfinished wood will eventually discolor.
The other thing I noticed is that flooring usually transitions under the door. When the door is closed, the flooring seems to continue, until the door is opened.
The tile floor would need to be cut before the wood flooring was installed.