My wife was vacuuming and somehow we got a scratch in our new Bausen Elbrus engineered hardwood floor. The scratch seems to be just through the top layers and not down to the wood (I can hang a finger nail in it) .

The manufacture states the coating is UV Cured Aluminum Oxide Polyurethane Finish (2 of Aluminum oxide; 8 of Polyurethane; 2 of scratch resistant). Does anyone know of a good method to repair this type of scratch? I've attached a picture below.

Thanks for any help you guys can give me!

This may not work in your case, but sometimes if a scratch is small and/or running the same direction as the grain you can sometimes use a sharpie (that is close to the color of the wood, of course) and gently mark the scratch. Then with a wet finger, your tongue works great , rub the color in the scratch to blend it in and at the same time getting it off the un-scratched surface.