Hello. I have a two year old house with hardwood floors. The floors needed a cleaning so I used http://www.bruce.com/resflram/na/bruce/en/us/fc_detail.asp?productId=22.0&subSilo=BWOODU to clean the floors. They came out real good. I wanted to have a nicer shine, so I applied http://www.bruce.com/resflram/na/bruce/en/us/fc_detail.asp?productId=25.0&subSilo=BWOODU but when I applied it the floor started to look bad. I got nervous, so I used the above cleaner twice to remove the finish product.

Now that I look at the floor, they look dull compared to the rest of my floors.

What should I do to make the floor look the way it did????

Thanks.

To get your floors back. You might have to pad a recoat the entire floor to achieve the success you are looking for. However, a less expensive option might be to try the Bruce or Bona Refresher Products These products are a maintenance product used to temporarily restore floors.

For the lower cost you might find it is adequate. If not you could step up to the pad and recoat.