nEW TO POST HERE... fIRST AND SECOND COAT OF pOLY TOOK LIKE TWO DAYS TO DRY. aBRADED BETWEEN COATS. THIRD COAT HAS AREAS OF BUBBLES ABRADED AGAIN AND COATED WENT BACK THIS HAS BEEN LIKE FOUR DAYS AGO AND THERE ARE LITTLE BUBBLES NOW EVERYWHERE. tHE THIRD COAT WAS APPLIED WITH A ROLLER. oTHER COATS WITH BRUSH COULD THIS BE THE CAUSE OR AM i NOW GOING TO HAVE TO START COMPLETELY OVER? fAST RESPONSE GREATLY APPRECIATED!

The first coat must be dry before putting on a second coat.

Air must be moving to dry the floor. No air ... no dry.

Your coatings are taking far too long to dry.

What are the conditions of the room or building?